4591 Paddle Handle
Designed for simple push or pull operation as an alternative to a lever handle, for use with the 4700/4900 series deadlatch (except 4750) and the MS+1890 Latch/Deadlock. Dogging comes as standard on all versions. NOTE: When used on timber doors, a mounting plate must be used.
The push version of the 4591, when used on the 4710/4910 and 4720/4920 Series Deadlatch and used in conjunction with the 8460 ramp jaw strikes or the 7108 and 7128 electric strikes, conforms to BS EN 179: 1998+A1: 2001 EC Certificate of Conformity number 1121-CPD-AB0011.

NOTE: An active dummy model is available, the 4591M.

	Escutcheon: 105mm x 34mm x 58.7mm (width of base flange). Zinc Alloy, Black finish.
	Paddle: 85mm x 125mm. Maximum projection off face of door: 74.24mm. Extruded Aluminium, available in Satin Anodised, Dark Bronze, Black.
	Spindle: 6.35mm (1/4”) on the diamond, heat treated. Interlocks with cam plug. Standard spindle lengths to suit 44.45mm (1 3/4”) door thickness.
	Operation: Four modes: Push to Left, Push to Right, Pull to Left and Pull to Right.
	Conforms to BS EN 179: 1998+A1: 2001
	Fitting instructions: Download
	Installation recommendations : Download
	Maintenance guide : Download
	Certificate of conformity: Download

In accordance with BS EN 179: 1998+A1: 2001 this product is designed to be used in emergency situations where people are familiar with the emergency exit and its hardware and therefore a panic situation is unlikely to develop. Where panic situations are foreseen, reference should be made to the Adams Rite 900 Series panic exit device range.