4781 Two Point Latch
Using a combination of existing products (the 960 CVR Exit Device rod mechanism and the 4591 Paddle Handle), this product has been designed to satisfy the requirements where a full door width bar is undesirable for aesthetic or functional reasons. The 4781 Series has been tested to BS EN 179:1998+A1:2001 EC Certificate of Conformity No: 1121-CPD-AA0012.
The push action of the paddle handle releases the top and bottom locking points and allows the door to swing open; a dogging facility is standard whereby the mechanism is secured in the open position, with the door free-swinging until released. Will accommodate any height (from threshold bolt to centreline of paddle) from 762mm (30") to 1118mm (44") and any door height up to 1676mm (66") above the centreline. Can be specified with all Adams Rite Entry Trim and is available in three anodised finishes: Aluminium, Bronze and Black.

NOTE: Doors with stile wall thicker or thinner than nominal 3.2mm, (1/8”) require factory modification to the device. Doors with overall thickness greater than 44.45mm (1 3/4”) also require special modification to device if cylinder or entry trim actuation from outside is required.

	Escutcheon: 105mm x 34mm x 58.7mm. Zinc Alloy, Black finish.
	Paddle: 85mm x 125mm. Extruded Aluminium, available in Satin Anodised, Dark Bronze and Black.
	Operation: Two modes: Push to Left or Push to Right.
	External Entry: Optional; Mortice Cylinder (with MS®cam) and 8650 Cylinder Escutcheon or 8066 Entry Trim and 3080 Entry trim.
	Conforms to BS EN 179: 1998+A1: 2001
	Fitting instructions: Download
	Installation recommendations: Download
	Maintenance guide: Download

In accordance with BS EN 179: 1998+A1: 2001 this product is designed to be used in emergency situations where people are familiar with the emergency exit and its hardware and therefore a panic situation is unlikely to develop. Where panic situations are foreseen, reference should be made to the Adams Rite 900 Series Panic Exit Device range.