4591 Paddle Handle
Designed for simple push or pull operation as an alternative to a lever handle, for use with the 4700 series deadlatch (except 4750) and the MS+1890 Latch/Deadlock. Dogging comes as standard on all versions. NOTE: When used on timber doors, a mounting plate must be used. The push version of the 4591, when used on the 4710 and 4720 Series Deadlatch and used in conjunction with the 8460 ramped strike series or the electric strike versions 7108 and 7128, conforms to BS EN 179: 1998+A1: 2001 EC Certificate of Conformity number 1121-CPD-AB0011.

	Escutcheon: 105mm x 34mm x 58.7mm (width of base flange). Zinc Alloy, Black finish.
	Paddle: 85mm x 125mm. Maximum projection off face of door: 74.24mm. Extruded Aluminium, available in Satin Anodised, Dark Bronze, Black.
	Spindle: 6.35mm (1/4”) on the diamond, heat treated. Interlocks with cam plug. Standard spindle lengths to suit 44.45mm (1 3/4”) door thickness.
	Finishes: Dark bronze, black, silver.
	Operation: Four modes: Push to Left, Push to Right, Pull to Left and Pull to Right.
	Conforms to BS EN 179: 1998+A1: 2001
	Hold open feature as standard
	Fitting instructions: Download
	Installation recommendations : Download
	Maintenance guide : Download
	Certificate of conformity: Download

In accordance with BS EN 179: 1998+A1: 2001 this product is designed to be used in emergency situations where people are familiar with the emergency exit and its hardware and therefore a panic situation is unlikely to develop. Where panic situations are foreseen, reference should be made to the Adams Rite 900 Series panic exit device range.