7181 - Electric Strike with Steel Wraparound Faceplate

With the development of new products Adams Rite is using their experience and innovation to produce quality products for existing and new markets.

In this section you will find products that meet the needs of almost any security application or standard in Europe.

Application

The Adams Rite 7100 Series is for remote use access control of any door equipped with Adams Rite 4700 series (or similar) deadlatch.

The design of the steel wraparound faceplate helps provide additional protection to the timber door frame in the area of the electric strike.

Specification

  • Suitable for use on timber doors
  • Angled fixing points to increase resistance against levering attack
  • Facility to change duty from fail-safe to fail-secure and vice-versa
  • Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the latch itself 
  • The sub cover is flush with the outer face of the steel faceplate and is therefore ideal in situations where a 'T-Bar' protection strip is fitted
  • Non-handed
  • 907kg holding force (2000lbs)
  • Guarantee 3 years

Finish

RiteKey Keypad ~ Push-to-Exit Button) ~ Power Supply Unit ~ 4720 Deadlatch

Standards

Current Draw: 12vAC=1.48A, 12vDC=0.37A, 24vAC=0.74, 24vDC=0.19A (nominal). DC intermittent and continuous units are silent, AC intermittent units "buzz" on operation
Voltage Tolerance: +/- 10%
Powered by: Internal solenoid
Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid.
Duty: Fail-safe or fail secure (convertible without additional parts). DC power supply required for fail-safe operation.
Jaw Strength: 907kg (2000lbs
Case: 85.6mm x 28.6mm x 41.7mm Zinc aluminium alloy
Mechanism: Stainless steel internal blocking mechanism
Strike Opening: 36.5mm x 15.9mm x 12.7mm. Stainless steel bolt retainer jaw.
Door gap: Minimum 3mm (1⁄8"), operational door gap 3-5mm.
Faceplate: Steel armoured forend/faceplate. 302mm x 37mm x 25.4mm return (all models). Flat.
Finish: Satin nickel plate on steel.
Subcover: The subcover on the 7181 has been designed to suit most 'T' bar protection strip applications used on certain security doors.
Standards: ANSI/BHMA 156.5 Grade 1 UL listed for burglary resistance
Note: Product is non-handed but jaw is offset from horizontal
centre line when reversed. Product fixings for door
frames not included.
Ordering Options
7181-310-646
7181 12VDC FAIL SECURE ELECTRIC RELEASE WA F/PLATE SATIN NICKEL
7181-315-646
7181 12VDC FAIL SAFE ELECTRIC RELEASE WA F/PLATE SATIN NICKEL
7181-517-646-1
7181 12VDC FAIL SAFE ELECTRIC RELEASE WA F/PLATE SATIN NICKEL SINGLE MONITORED