Power Supplies - DC & AC Power Supply Units

Blue_3G.jpg CE.png

With the development of new products Adams Rite is using their experience and innovation to produce quality products for existing and new markets.

In this section you will find products that meet the needs of almost any security application or standard in Europe.

Application

The Adams Rite Rite Power Supply Unit is a mains powered battery supported standby power supply, housed in a robust, compact wall mounted steel fabricated case (except 4605) with a lift-off hinged front panel.

Specification

  • Case is epoxy powder coated, with cable entry provided by 20mm conduit knock-outs located in top and bottom and each side of the case.
  • Standby power is automatically provided from a battery or batteries connected to the battery charging output.
  • Battery charging output is provided to continuously charge up to either 1 x 12v 7 Amp Hour or 2 x 12v 3 Amp Hour (connected in series) sealed acid batteries.
  • DC version avaliable in 12v 1 or 3 Amp
  • 12/24V selectable - 2 or 1 Amp respectively
  • 4605 12V AC trabsformer for AC electric strikes

Finish

7100 Series Electric Strikes ~ Armlock® 261 & 281 Direct-Pull Magnets ~ MS Maglock ~ Armlock® 1354 Mini Electro-Shearmagnet ~1391 Electric Solenoid Bolt ~ Push-to-Exit Button

Standards

Material: Mild steel box, powder coated white with hinged lid (type BX 5, except 4605)
Dimensions: 233mm x 233mm (12-01 & 1225) 233mm x 310mm (12-03)
Input: Mains 230V AC (50 to 60 Hz)
Output: Selectable 
Output Voltage Tolerance: +/-10%
1225 Current Output (max): 12vDC - 2 Amp, 24vDC - 1 Amp
12-01 Current Output (max): 12vDC - 1 Amp
12-03 Current Output (max): 12vDC - 3 Amp
4605-240 Current Output (max): 12vAC - 2 Amp, 24vDC - 2 Amp
Other Features: Built in aluminium heat sink
  Mains input voltage and DC output voltages are protected by 20mm fuses.
  Output ripple better than 20 millivolts pk-pk on full load
  Red LED to indicate mains volatge present; green LED to indicate DC output voltage present
  Transformer flash tested at 4kV
  Varnished to reduce mains hum.
Ordering Options
12-01
POWER SUPPLY 12V DC 1AMP RATED TO 10% VOLTAGE TOLERANCE RoHS COMPLIANT
12-03
POWER SUPPLY 12V DC 3AMP RATES TO 10% VOLTAGE TOLERANCE RoHS COMPLIANT
1225
POWER SUPPLY 12/24V DC 2/1 AMP RATED TO 10% VOLTAGE TOLERANCE RoHS COMPLIANT
1270
BATTERY 12V RECHARGEABLE 7AMP 1 HOUR
4603
RECTIFIER
4605-240
12/24V AC 2 AMP TRANSFORMER