4591M and 999M - Dummy Paddle Handle & Exit Device

With the development of new products Adams Rite is using their experience and innovation to produce quality products for existing and new markets.

In this section you will find products that meet the needs of almost any security application or standard in Europe.

Application

The Adams Rite 4591M Paddle Handle and 999M Touch Bar are designed to be used as an alternative to switches to control an access control locking device.  Their familiar design may be suited more to building owners or users.

Specification

 

  • Designed as active dummy models where activation operates an integral microswitch to control the unlocking of Armlock® Magnetic locks or similar devices 
     
  • Available with both normally open and normally closed contacts to make or break a circuit
  • Suitable for use on aluminium, timber and steel doors 
     

 

Finish

Armlock® 261 & 262 Direct Pull Magnets ~ Armlock® 281 Direct Pull Magnet ~ MS Maglock

Standards

Escutcheon: Zinc Alloy. 105mm x 34mm x 59mm. Black finish.
Paddle: Extruded aluminium. 84mm x 125.74mm. Maximum projection off face of door: 78mm. Satin anodised (628) finish.
Operation: Four models: Push to left, push to right, pull to left and pull to right.
Monitoring: Single microswitch
Micro  Swithc: Single pole double throw
999M Exit Device: 1080kg
Projection: 76.5mm from face of door
Vertical Width: 60mm
Opening Widths: Four standard sizes - 750mm, 900mm, 1050mm, 1200mm.
Width Variations: 750mm bar can be cut down to 662mm, 900mm & 1050mm bars to 705mm, and 1200mm bar can be cut down to 905mm.
Push Bar: Extruded aluminium alloy. Removable for polyester powder coating if required.
Dogging Facility: Built-in, operated by dogging key (two supplied).
Monitoring: Option of single or double microswitches.
Micro Switch: Single pole double throw.
Rated: 125vAC - 3A; 30vDC - 2A.
Ordering Options
4591-01-628-01
PULL TO LEFT DUMMY PADDLE HANDLE SAA
4591-02-628-01
PUSH TO LEFT DUMMY PADDLE HANDLE SAA
4591-03-628-01
PULL TO RIGHT DUMMY PADDLE HANDLE SAA
4591-04-628-01
PUSH TO RIGHT DUMMY PADDLE HANDLE SAA
999-02-1-999-628
DUMMY PUSH BAR 600MM SINGLE MONITORING SAA
999-02-3-999-628
DUMMY PUSH BAR 900MM SINGLE MONITORING SAA
999-02-4-999-628
DUMMY PUSH BAR 1050MM SINGLE MONITORING SAA
999-03-3-999-628
DUMMY PUSH BAR 900MM DOUBLE MONITORING SAA
999-01-3-999-628
DUMMY PUSH BAR C/W CYLINDER DOGGING
999-02-5-999-628
DUMMMY PUSH BAR SINGLE MONITORED 1200MM SAA
999-03-4-999-628
DUMMY PUSH BAR DOUBLE MONITORED 1050MM SAA