940 Series - Mortice Exit Device

CE.png

With the development of new products Adams Rite is using their experience and innovation to produce quality products for existing and new markets.

In this section you will find products that meet the needs of almost any security application or standard in Europe.

Application

The Adams Rite 940 Series Mortice Exit device is a life safety device designed to fit into commercial aluminium door applications.

 

Specification

  • Suitable for use on aluminium doors
  • The device has an all steel latch case with an oil impregnated solid brass bolt and deadlatching mechanism
  • Available in backset of 24.6mm, 28.6mm and 38.1mm and requires a  minimum door stile depth of 16.3mm greater than the backset
  • Special versions available for doors thicker than 44.45mm and where longer strike lips are required for centre-hung doors 
  • Standard units cover door thickness up to 48mm with no extensions required
     
  • Flat, bevelled, radius or radius with weatherstrip faceplates are available
  • Unique tab system allows the flat faceplate to be used to suit bevelled sections on the 28.6mm and 38.1mm backset sizes
  • Options include: Monitoring and Cylinder dogging
  • Dogging as standard on all versions except 600mm
  • Accepts only standard mortice cylinder (with MS® cam) allowing external key access 
     

Finish

4056 Round Cylinder ~ MS® 4043 Cylinder Guard ~ 3080 and 3080E Series Entry Trims ~ 7108 Electric Strike ~ 7128 Electric Strike 

 

Standards

Projection: 76.5mm from face of door.
Push Bar Face Width: 62mm
Back Bar Width: 70mm.
Door Opening Widths: Five standard sizes - 600mm, 750mm, 900mm, 1050mm, 1200mm.
Width Variations: See dimensional limitations
Push Bar: Extruded Aluminium Alloy.
Removable for Polyester Powder Coating if required.
Dogging Facility: Built-in. Operated by dogging key (two supplied). NOTE: Not available on 600mm door opening width bar.
Case: Steel with corrosion-resistant plating.
Latch Backsets: 24.6mm, 28.6mm, 38.1mm.
Latch Bolt: 25.4mm x 16mm. Oil impregnated solid brass. Hardened steel internal pins, plus anti-pick baffle.
Bolt Throw: 15.3mm.
Auxiliary Bolt: Stainless Steel Pin.
Door Gap: Maximum 5mm.
Forend: Steel, with aluminium faceplate.

 

Ordering Options
940-00-1-7U3-628
940 UNIVERSAL MORTICE EXIT DEVICE RHR 28.6MM BACKSET SAA
940-00-1-7U4-628
940 UNIVERSAL MORTICE EXIT DEVICE RHR 38.1MM BACKSET SAA
940-00-1-7U4-628-952
940 UNIVERSAL MORTICE EXIT DEVICE 600MM RHR 38.1MM BACKSET 52MM DOOR
940-00-1-8U2-628
940 UNIVERSAL MORTICE EXIT DEVICE 600MM LHR 24.6MM BACKSET SAA
940-00-1-8U3-628
940 UNIVERSAL MORTICE EXIT DEVICE 600MM RHR 28.6MM BACKSET SAA
940-00-1-8U4-628
940 UNIVERSAL MORTICE EXIT DEVICE 600MM RHR 38.1MM BACKSET SAA
940-00-2-7U2-628
940 UNIVERSAL MORTICE EXIT DEVICE 750MM RHR 24.6MM BACKSET SAA
940-00-2-7U3-628
940 UNIVERSAL MORTICE EXIT DEVICE 750MM RHR 28.6MM BACKSET SAA
940-00-2-7U4-628
940 UNIVERSAL MORTICE EXIT DEVICE 750MM RHR 38.1MM BACKSET SAA
940-00-2-7U4-628-952
940 UNIVERSAL MORTICE EXIT DEVICE 750MM RHR 38.1MM BACKSET S
940-00-2-7U4-628-967
940 UNIVERSAL MORTICE EXIT DEVICE 750MM RHR 38.1MM BACKSET S
940-00-2-8U2-628
940 UNIVERSAL MORTICE EXIT DEVICE 750MM LHR 24.6MM BACKSET SAA
940-00-2-8U3-628
940 UNIVERSAL MORTICE EXIT DEVICE LHR 28.6MM BACKSET SAA
940-00-2-8U3-628-952
940 UNIVERSAL MORTISE EXIT DEVICE LHR 28.6MM BACKSET SAA 52MM DOOR
940-00-2-8U4-628
940 UNIVERSAL MORTICE EXIT DEVICE LHR 38.1MM BACKSET SAA
940-00-2-8U4-628-967
940 MORTICE EXIT DEVICE 750MM LHR 24.6MM BACKSET SAA 67MM DO
940-00-3-7U2-628
940 UNIVERSAL MORTICE EXIT DEVICE 900MM RHR 28.6MM BSET SAA
940-00-3-7U3-628
940 UNIVERSAL MORTICE EXIT DEVICE 900MM RHR 28.6MM BACKSET SAA
940-00-3-7U3-628-974
940 MORTICE EXIT DEVICE 900MM RHR 28.6MM BSET SUIT 67MM DR
940-00-3-7U4-628
940 UNIVERSAL MORTICE EXIT DEVICE 900MM RHR 38.1MM BACKSET SAA
940-00-3-7U4-628-967
940 UNIVERSAL MORTICE EXIT DEVICE 900MM RHR 38.1MM BACKSET S
940-00-3-8U2-628
940 UNIVERSAL MORTICE EXIT DEVICE 900MM LHR 28.6MM BSET SAA
940-00-3-8U3-628
940 UNIVERSAL MORTICE EXIT DEVICE 900MM LHR 28.6MM BACKSET SAA
940-00-3-8U3-628-952
940 UNIVERSAL MORTICE EXIT DEVICE 900MM LHR 28.6MM BACKSET SAA 52MM DOOR
940-00-3-8U3-628-967
940 MORTICE EXIT DEVICE 900MM LHR 28.6MM BSET SUIT 67MM DR
940-00-3-8U4-628
940 UNIVERSAL MORTICE EXIT DEVICE 900MM LHR 38.1MM BACKSET SAA
940-00-3-8U4-628-952
940 UNIVERSAL MORTICE EXIT DEVICE 900MM LHR 38.1MM BACKSET SAA 52MM DOOR
940-00-3-8U4-628-967
940 UNIVERSAL MORTICE EXIT DEVICE 900MM LHR 38.1MM BACKSET S
940-00-4-7U2-628
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM RHR 24.6MM BACKSET SAA
940-00-4-7U3-628
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM RHR 28.6MM BACKSET SAA
940-00-4-7U4-628
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM RHR 38.1MM BACKSET SAA
940-00-4-7U4-628-952
940 UNIVERSAL MORTISE EXIT DEVICE 1050MM RHR 38.1MM BACKSET
940-00-4-8U2-628
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM LHR 24.6MM BACKSET SAA
940-00-4-8U3-628
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM LHR 28.6MM BACKSET SAA
940-00-4-8U3-628-952
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM LHR 28.6MM SAA 52MM DOOR
940-00-4-8U3-628-967
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM LHR 28.6MM BACKSET
940-00-4-8U4-628
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM LHR 38.1MM BACKSET SAA
940-00-4-8U4-628-952
940 UNIVERSAL MORTISE EXIT DEVICE 1050MM LHR 38.1MM BACKSET SAA 52MM DOOR
940-00-4-8U4-628-967
940 UNIVERSAL MORTISE EXIT DEVICE 1050MM LHR 38.1MM BACKSET
940-00-5-7U2-628
940 UNIVERSAL MORTICE EXIT DEVICE 1200MM RHR 24.6MM BACKSET SAA
940-00-5-7U2-628-967
UNIVERSAL MORTICE EXIT DEVICE 1200MM RHR 24.6MM BS SAA 67MM
940-00-5-7U3-628
940 UNIVERSAL MORTICE EXIT DEVICE 1200MM RHR 28.6MM BACKSET SAA
940-00-5-7U4-628
940 UNIVERSAL MORTICE EXIT DEVICE 1200MM RHR 38.1MM BACKSET SAA
940-00-5-7U4-628-952
UNIVESAL MORTICE EXIT DEVICE 1200MM RHR 38.1MM BS SAA 52MM D
940-00-5-8U2-628
940 UNIVERSAL MORTICE EXIT DEVICE 1200MM LHR 24.6MM BACKSET SAA
940-00-5-8U3-628
940 UNIVERSAL MORTICE EXIT DEVICE 1200MM LHR 28.6MM BACKSET SAA
940-00-5-8U3-628-952
940 UNIVERSAL MORTICE EXIT DEVICE 1200MM LHR 28.6MM BACKSET SAA 52MM DOOR
940-00-5-8U3-628-967
940 UNIVERSAL MORTICE EXIT DEVICE 1200MM LHR 28.6MM BS 67MM
940-00-5-8U4-628
940 UNIVERSAL MORTICE EXIT DEVICE 1200MM LHR 38.1MM BACKSET SAA
940-01-2-8U3-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-3-7U3-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-4-8U3-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-5-7U2-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-5-8U2-628
MORTICE EXIT DEVICE C/W CYL DOGGING
960-01-1-999-628
960 CVR EXIT DEVICE 600MM SAA C/W CYLINDER DOGGING
960-02-3-999-628
960 CVR EXIT DEVICE 900MM SAA SINGLE MONITORED
940-00-2-7U3-628-967
940 UNIVERSAL EXIT DEVICE 750MM RHR 28.6MM BSET SAA 67MM
940-00-2-7U3-628-974
940 UNIVERSAL MORTICE EXIT DEVICE 750MM RHR 24.6MM BS 74MM
940-00-2-7U4-628-954
940 UNIVERSAL MORTICE EXIT DEVICE 750MM RHR 38.1MM BACKSET S
940-00-2-8U3-628-967
940 UNIVERSAL MORTICE EXIT DEVICE 900MM LHR 28.6MM BSET SAA
940-00-3-7U3-628-947
940 UNI MORT EXIT DEVICE 900MM RHR 28.6MM BSET SAA 47MM DR
940-00-3-7U4-628-947
940 UNIVERSAL MORTICE EXIT DEVICE 900MM RHR 38.1MM BACKSET S
940-00-4-7U3-313
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM RHR 28.6MM BACKSET
940-00-4-7U3-335
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM RHR 28.6MM BACKSET
940-00-4-7U3-335-947
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM RHR 28.6MM BACKSET
940-00-4-7U3-628-947
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM RHR 28.6MM BACKSET
940-00-4-7U3-628-974
940 MORTICE EXIT DEVICE 1050MM RHR 28.6MM BACKSET SUIT 74MM
940-00-4-7U4-628-947
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM RHR 38.1MM BACKSET
940-00-4-8U3-628-947
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM LHR 28.6MM BACKSET
940-00-4-8U3-628-960
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM LHR 28.6MM BACKSET
940-00-5-8U3-628-947
940 UNI MORTICE EXIT DEVICE 1200MM LHR 28.6MM BSET SAA 47MM
940-00-5-8U4-628-947
940 UNIVERSAL MORTICE EXIT DEVICE 1200MM LHR 38.1MM BACKSET
940-00-5-8U4-628-954
940 UNIVERSAL MORTISE EXIT DEVICE RHR 38.1 BACKSET SAA 54MM
940-00-1-702-628
940 MORTICE EXIT DEVICE 600MM RHR 24.6MM BACKSET SAA
940-00-2-742-628
940 MORTICE EXIT DEVICE 750MM RHR 24.6MM BACKSET SAA
940-00-2-802-628
940 MORTICE EXIT DEVICE 750MM LHR 24.6MM BACKSET SAA
940-00-2-802-628-947
940 MORTICE EXIT DEVICE 750MM LHR 24.6MM BACKSET SAA 47MM DO
940-00-2-842-628
940 MORTICE EXIT DEVICE 750MM LHR 24.6MM BACKSET SAA
940-00-3-702-628
940 MORTICE EXIT DEVICE 900MM RHR 24.6MM BACKSET SAA
940-00-3-802-628
940 MORTICE EXIT DEVICE 900MM LHR 24.6MM BACKSET SAA
940-00-4-702-628
940 MORTICE EXIT DEVICE 1050MM RHR 24.6MM BACKSET SAA
940-00-4-702-628-967
940 MORTICE EXIT DEVICE 1050MM RHR 24.6MM BACKSET SAA 67MM D
940-00-5-702-628
940 MORTICE EXIT DEVICE 1200MM 24.6MM RHR BACKSET SAA
940-00-5-822-628
940 MORTICE EXIT DEVICE 1200MM LHR 24.6MM BACKSET SAA
940-00-5-842-628
940 MORTICE EXIT DEVICE 1200MM LHR 24.6MM BACKSET SAA
940-01-2-802-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-3-704-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-3-802-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-3-814-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-4-702-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-02-2-802-628
940 EXIT DEVICE SGL MONITORED LHR FLAT F/PLATE 24.6MM SAA
940-02-2-703-628-974
MORTICE EXIT DEVICE SNGL MONITORED
940-03-1-803-628
MORTICE EXIT DEVICE DBLE MONITORED
940-03-2-803-628
MORTICE EXIT DEVICE DBLE MONITORED
940-03-3-714-628
MORTICE EXIT DEVICE DBLE MONITORED
940-03-4-704-628
MOTICE EXIT DEVICE DOUBLE MONITORED
940-00-1-742-628
940 MORTICE EXIT DEVICE 600MM RHR 24.6MM BACKSET SAA
940-00-2-802-335
940 MORTISE EXIT DEVICE 750MM LHR 24.6MM BACKSET BLACK
940-00-2-803-628-974
940 MORTICE EXIT DEVICE 750MM LHR 28.6MM BACKSET SAA 74MM DO
940-00-3-702-335
940 MORTICE EXIT DEVICE 900MM RHR 24.6MM BACKSET BLACK
940-00-3-802-335
940 MORTICE EXIT DEVICE 900MM LHR 24.6MM BACKSET BLACK
940-00-3-803-335
940 MORTICE EXIT DEVICE 900MM RHR 28.6MM BACKSET BLACK
940-00-3-804-335
940 MORTICE EXIT DEVICE 900MM RHR 38.1MM BACKSET BLACK
940-00-3-812-628-948
940 MORTICE EXIT DEVICE 900MM LHR 24.6MM BACKSET SAA 48MM DO
940-00-3-813-628-951
940 MORTICE EXIT DEVICE 900MM LHR 28.6MM BACKSET SAA 51MM DO
940-00-3-813-628-954
940 MORTICE EXIT DEVICE 900MM LHR 28.6MM BACKSET SAA 54MM DO
940-00-4-702-628-952
940 MORTICE EXIT DEVICE 1050MM RHR 24.6MM BACKSET SAA 52MM D
940-00-4-702-628-990
940 MORTICE EXIT DEVICE 1050MM RHR 24.6MM BACKSET SAA 90MM D
940-00-4-703-628-950
940 MORTICE EXIT DEVICE 1050MM RHR 28.6MM BACKSETFOR 50MM DO
940-00-4-722-335
940 MORTICE EXIT DEVICE 1050MM RHR 24.6MM BACKSET BLACK
940-00-4-802-335
940 MORTICE EXIT DEVICE 1050MM LHR 24.6MM BACKSET BLACK
940-00-4-802-628-950
940 MORTICE EXIT DEVICE 1050MM LHR 24.6MM BACKSET SAA 50MM D
940-01-1-702-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-3-702-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-3-703-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-3-714-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-3-722-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-3-743-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-3-813-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-4-702-335
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-4-703-628-948
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-4-704-628-475
MORTICE EXIT DEVICE FOR 47.5MM DOOR
940-01-4-722-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-4-723-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-4-743-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-4-803-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-4-803-628-949
MORTICE EXIT DEVICE FOR 49MM DOOR
940-01-4-804-628
MORTICE EXIT DEVICE C/W CYL DOGGING
940-01-4-804-628-475
MORTICE EXIT DEVICE FOR 47.5MM DOOR
940-01-5-704-335-950
MORTICE EXIT DEVICE FOR 50MM DOOR
940-00-1-7U2-628
940 UNIVERSAL MORTICE EXIT DEVICE 600MM RHR 24.6MM BSET SAA
940-00-2-7U3-628-967
940 UNIVERSAL EXIT DEVICE 750MM RHR 28.6MM BSET SAA 67MM
940-00-2-8U2-628-947
940 UNI MORTICE EXIT DEVICE 750MM LHR 24.6MM BSET SAA 47MM
940-00-2-8U3-628-967
940 UNIVERSAL MORTICE EXIT DEVICE 900MM LHR 28.6MM BSET SAA
940-00-3-7U3-628-967
940 MORTICE EXIT DEVICE 900MM RHR 28.6MM BSET SUIT 67MM DR
940-00-3-802-628-PB
940 EXIT DEVICE 900MM PUSH BAR ONLY SAA
940-00-3-804-628-PB
940 EXIT DEVICE 900MM PUSH BAR ONLY SAA
940-00-4-703-628-PB
940 MORTICE EXIT DEVICE 1050MM PUSH BAR ONLY SAA
940-00-4-7U2-628-967
940 UNI MORTICE EXIT DEVICE 900MM RHR 24.6MM BSET SAA 67MM
940-00-4-7U3-628-967
940 UNIVERSAL MORTICE EXIT DEVICE 1050MM RHR 28.6MM BACKSET
940-00-4-7U4-628-955
940 UNIVERSAL MORTISE EXIT DEVICE 1050MM RHR 38.1MM BACKSET