4730 - Standard Duty Deadlatch

With the development of new products Adams Rite is using their experience and innovation to produce quality products for existing and new markets.

In this section you will find products that meet the needs of almost any security application or standard in Europe.

Application

The 4530 Standard Duty Deadlatch offers flexibility of traffic control during and after business hours.

A reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times

Specification

  • 4530 Deadlatches are designed to fit without alteration, the stile cutout for older MS1850 Deadlocks and discontinued 4250 Deadlatches of same backset.

  • While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging.

  • All metal. Deadlocks latchbolt to prevent "loiding" or case-knife entry. 
     
  •  Standard strike furnished is 4901-01 for flat jamb. For dimensions of this as well as radiused and/or short strikes

  •  4530 Standard Duty Deadlatches are operable by any standard 1-5/32" diameter mortise cylinder with MS® cam dimensioned as shown.

  •  Cylinders with MS® cams can be readily obtained from most cylinder manufacturers.


 

Finish

Standards

CYLINDER BACKSET
• 7/8", 31/32", or 1-1/8" only.

 

CASE
• Measures 1" x 5-13/16" x depth. Depth varies by backset. Steel with corrosion-resistant plating.

 

LATCHBOLT
• 1/2" x 1" x 1/2" throw. All metal with hardened steel internal pins. Handing is reversible without special tools.

 

FACEPLATE
• Measures 1-1/4" x 7-13/32".
 

Ordering Options
4730-100-5
DEADLATCH 7/8 BACKSET BODY ONLY LH 188MM FRONT PLATE
4730-200-5
DEADLATCH 31/32 BACKSET BODY ONLY LH 188MM FRONT PLATE
4730-300-5
DEADLATCH 1 1/8 BACKSET BODY ONLY LH 188MM FRONT PLATE
24-4730-002-628
4730 FACEPLATE REPLACEMENT