430A - Sentinel Maximus 3 Point Panic Lock

Blue_3G.jpg CE.png 3_point_panic_icon.jpg

With the development of new products Adams Rite is using their experience and innovation to produce quality products for existing and new markets.

In this section you will find products that meet the needs of almost any security application or standard in Europe.

Application

Adams Rite's new commercial 3 point panic lock offers 3 points of trusted locking, whilst still allowing for quick and easy egress due to its unique orbital latch design.

Click here for the Sentinel M Range Brochure

 

Specification

  • Operates with panic bar for immediate egress.
  • Split Follower & Unique 'Orbital' latch 
  • Avaliable with U or flat faceplate
  • Avalible in 30 or 35mm backset
  • Stainless steel faceplate and strike
  • Designed for open out doors
  • Tested to over 250,000 cycles
  • 360 degree turn of key fully secures all 3 bolts. 
  • Slim case design of 15mm to fit into latest commercial door sections.
  • External entry option avaliable
  • Package designed to enable doorset testing to PAS24/EN1627 RC3
  • CE marked to EN1125:2008
  • Supplied with strike plate

Finish

400TB Panic Escape Device ~ 400LH External Lever Handle ~ 400CS Cylinder Support/Guard ~ 400ES Cylinder Guard

Standards

Lock Front Plate:

1860mm x 22mm x 2.5mm (Flat version)

1860mm x 24mm x 6mm (U version)

Backset Measurement: Backset measured from inside of front plate to CL cylinder Flat plate: Always 30mm or 35mm (add 2.5mm for front plate)U plate: Backset dependant on where measured from
Measure Point
Front of Plate
Inside Front Plate
Peak of U
 
30mm 35mm
32mm 37mm
30mm 35mm
26mm 31mm
 
Central Case Size (general dims):

242mm x 15mm x 45.5mm (30mm backset Flat)

242mm x 15mm x 50.5mm (35mm backset Flat)

242mm x 15mm x 45mm (30mm backset U)

242mm x 15mm x 50mm (35mm backset U)

Slave Case: 120mm x 15mm x 39mm
Materials: Lock Faceplate - Stainless Steel Lock cases - Galvenised Steel Link Rods - Galvensied Steel Central Bolt - Laminated Steel Slave Bolt - Cast Zamac Strike Plate - Stainless steel
Bolt:

25.5mm pivoting hook bolt (centre)

25.5mm pivoting bar bolt (slave)

Strike Plate: 1860mm x 25mm x 2.5mm (All versions)
Cylinder: Operates with 17mm Europrofile cylinder, fitted with a DIN cam
Operation: 360° turn of key / thumbturn. Key only removable when bolt is positively locked or unlocked
Ordering Options
430A-22F30LO-SS
SENTINEL M 3 PT AP MPL 30MM BS FLAT LH SS
430A-22F30RO-SS
SENTINEL M 3 PT AP MPL 30MM BS FLAT RH SS
430A-22F35LO-SS
SENTINEL M 3 PT AP MPL 35MM BS FLAT LH SS
430A-22F35RO-SS
SENTINEL M 3 PT AP MPL 35MM BS FLAT RH SS
430A-24U26LO-SS
SENTINEL M 3 PT AP MPL 26MM BS U LH SS
430A-24U26RO-SS
SENTINEL M 3 PT AP MPL 26MM BS U RH SS
430A-24U31LO-SS
SENTINEL M 3 PT AP MPL 31MM BS U LH SS
430A-24U31RO-SS
SENTINEL M 3 PT AP MPL 31MM BS U RH SS