7170 - Deep Jaw Electric Strike

With the development of new products Adams Rite is using their experience and innovation to produce quality products for existing and new markets.


The Adams Rite 7100 Series is for remote use access control of any door equipped with Adams Rite 4700 series (or similar) deadlatch.

The 7170 has a flat faceplate and will accomodate a 19mm latch throw.



  • Suitable for use on timber and steel doors
  • Facility to change duty from fail-safe to fail secure and vice versa
  • Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the latch itself 

  • Will accommodate a latch throw of up to 19.05mm
  • The 7170 has square corners to aid installation into timber and steel doors
  • 907kg holding force (2000lbs)
  • Non-handed 



RiteKey Keypad ~ Push-to-Exit Button ~ Power Supply Unit


Current Draw: 12vAC=1.48A, 12vDC=0.332A, 24vAC=0.74A, 24vDC=0.19A (nominal). DC intermittent and continuous units are silent, AC intermittent units "buzz" on operation.
Voltage Tolerance: +/- 10%
Powered by: Internal solenoid
Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid
Duty: Fail-safe or fail-secure (convertible without
additional parts). DC power supply required for fail-safe operation.
Jaw Strength: 907kg (2000lbs).
Case: 85.6mm x 31.8mm x 41.6mm. Zinc aluminium alloy
Mechanism: Stainless steel internal blocking mechanism.
Strike Opening: 36.5mm x 19.1mm x 19.1mm. Stainless steel bolt retainer jaw.
Door gap: Minimum 3mm (1⁄8"), operational door gap 3-5mm.
Faceplate: Aluminium. 123.7mm x 31.8mm (7170); 260.3mm x 36.3mm(7171); 201.6mm x 36.3mm (7172); 201.6mm x 31.8mm (7173). Flat.
Finishes: See ordering codes.
Subcover: Basic subcover lip will suit a 44.45mm (1 3⁄4") thick door. For extended bolt-on subcovers see ordering codes.
Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance.
Ordering Options