MS 1848 and 5015 - Deadlocks and Accessories

Blue_3G.jpg

With the development of new products Adams Rite is using their experience and innovation to produce quality products for existing and new markets.

In this section you will find products that meet the needs of almost any security application or standard in Europe.

Application

 

The Adams Rite MS® 1848 and 5015 Deadlock & accessories are designed to fit within very narrow stile sliding door stiles without compromising the high degree of security needed by these doors.

 

Specification

  • Suitable for use on aluminium and timber doors
  • Bolt can be adjusted by 4.5mm to compensate for door and frame mis-alignment
  • Used with 4808 strike plate to prevent attempts to lift the door
  • Range of turns and 8346 cylinder to provide flexibility of operation
  • Self latching version will retract immediately on contact with strike to prevent damage

 

  • Adjustability: A full 4.6mm lengthening or shortening of bolt projection can be made by turning an exposed screw in the face of the lock. This can compensate for a considerable misalignment between door and jamb 
  • Anti-Lifting: The 3 ply laminated stainless steel hookbolt is designed to withstand approximately ton of the force vertically or horizontally, thus protecting against jamb/door attack

 

Finish

Standards

Overall Case Size: 102mm x 13mm x 28.5mm (MS®1848)
114mm x 15.5mm x 40.5mm (5015).
Case: Zinc Plated Steel.
Anti-Lift Bolt: 3-Ply Laminated Stainless Steel.
Forend: Square or full radiused ends (MS®1848)
Radiused ends (5015).
Operation: Standard bored cylinder (with pull) or 1000 Series Turn.

MS 1848 Latch Version:

Spring-loaded hookbolt for automatic latching.
Other specifications as for deadlock.

 

Ordering Options
1000-01-14-682
Aluminium Turn for inside of patio sliding door, for use with MS®1848 Deadlocks
1000-11-21-682
ALUMINIUM TURN FOR USE WITH MS1848 C/W ESCUTCHEON PARALLEL DRIVE 30MM SP. SAA
1000-11-32-682
ALUMINIUM TURN FOR USE WITH MS1848 C/W ESCUTCHEON PARALLEL DRIVE 47MM SP. SAA
1000-21-32-682
ALUMINIUM TURN FOR USE WITH MS1848 C/W ESCUTCHEON PERP. DRIVE 47MM SP.SAA
1016-130
Back Plate for 1015 Turn (order with above Turn)
1848-11
MS1848 D.LOCK WITH HOOKBOLT (SELF LATCHING)
1848-29
MS1848 D.LOCK WITH HOOKBOLT
23-0076-130
4024 Block only for patio sliding door (requires 8346-01). Fixes to pull handle
4801
4801 STRIKE ALUMINIUM FOR MS1848 PATIO DOOR LOCKS
5015
5015 DEADLOCK
8346-01
WEISER CYLINDER KD
4528
4528 CYLINDER FOR 4190 KD